Protective Coatings
Zinc-rich primers, surface-tolerant epoxies, polyurethane topcoats, tank linings and heat-resistant coatings for steel structures and maintenance.
Description
High-performance two-pack zinc-rich epoxy primer giving superior corrosion protection to steel.
Recommended use
Anti-corrosive primer for aggressive marine and port environments; usable underwater with topcoats.
Description
Fast-drying two-pack self-curing inorganic zinc primer with outstanding anti-corrosive protection.
Recommended use
Anti-corrosive primer for blast-cleaned steel, withstanding surface temperatures up to 400°C.
Description
Two-pack high-build epoxy primer with excellent anti-corrosive properties, abrasion resistance and adhesion.
Recommended use
Anti-corrosive blast primer for steel, galvanised iron, aluminium and other metals.
Description
High-build epoxy primer with zinc phosphate for 50–200 µm DFT per coat in medium corrosive conditions.
Recommended use
Chemical-resistant primer for steel structures and an undercoat to intumescent coatings.
Description
Self-priming, flexible high-build epoxy-polyamide primer with zinc phosphate for a tough barrier.
Recommended use
Maintenance coating for galvanised steel and non-ferrous process equipment and pipes.
Description
Quick-drying high-build epoxy mastic primer with anti-corrosive pigments and fast output.
Recommended use
Chemical-resistant finish for process equipment and pipework in medium corrosive conditions.
Description
High-build surface-tolerant epoxy primer-cum-finish for steel and concrete, easily recoated.
Recommended use
Maintenance coat for structural steel, applied over existing primers or aged alkyd paints.
Description
High-solids, low-VOC, surface-tolerant aluminium-flake epoxy primer for galvanised, new or old steel.
Recommended use
Self-priming maintenance coating for onshore and offshore installations.
Description
High-build epoxy-polyamide with outstanding chemical resistance and low water permeability.
Recommended use
Build coat for concrete and structural steel, pipelines, harbours and tanks.
Description
High-build epoxy-polyamide undercoat with good resistance to fresh and salt water; MIO version available.
Recommended use
Undercoat for structural steel, applied directly to stainless steel with a suitable topcoat.
Description
Polyamide-cured epoxy reinforced with micaceous iron oxide for a tough, chemical-resistant coat.
Recommended use
Build/finish coat for structural steel in onshore and offshore environments.
Description
High-build two-component acrylic polyurethane with excellent gloss and colour retention.
Recommended use
Recoatable topcoat for a wide range of substrates in new construction and maintenance.
Description
Two-component acrylic polyurethane with excellent gloss, colour retention and chemical resistance.
Recommended use
Finishing coat for galvanised steel transmission towers and structures.
Description
Two-component acrylic polyurethane with exceptional corrosion, weather and UV resistance.
Recommended use
Durable, glossy exterior finish with excellent colour and gloss retention.
Description
Two-component high-solids chemical-resistant epoxy phenolic tank lining.
Recommended use
Tank lining for a wide range of chemicals, including crude oil and gasoline blends.
Description
High-build solventless, non-toxic amine-cured epoxy with excellent chemical resistance.
Recommended use
Potable-water and food-grade lining for metal and concrete tanks; single-coat application.
Description
Single-component inorganic copolymer heat-resistant coating for temperatures from -196°C to 850°C.
Recommended use
Protection against corrosion under insulation on high-temperature piping, vessels and heaters.
Description
Two-component high-build epoxy phenolic coating with heat resistance up to 250°C.
Recommended use
Protects insulated steelwork under wet or dry thermal cycles in corrosive environments.
Description
Single-pack modified silicone-aluminium coating with heat resistance up to 600°C.
Recommended use
Finish for hot metal equipment in the oil and chemical process industries.
Description
Single-component silicone-acrylic heat-resistant finish up to 220°C with a smooth, glossy look.
Recommended use
Finish for vessels and pipes operating at elevated temperatures; suits stainless steel.
Description
General-purpose aluminium finish with heat resistance up to 200°C and a silver-glossy appearance.
Recommended use
Finish for galvanised steel, non-ferrous metals and ducting needing dry heat resistance.
Description
High-solids, high-build glass-flake epoxy that cures above and below water with excellent corrosion resistance.
Recommended use
For steel and concrete in splash/tidal zones and buried pipelines.
Looking for something else?
We carry a much wider range of products. Reach out to our expert team today, and we’ll help you find the exact system for your project.