Protective Coatings
Zinc-rich primers, high-build epoxies, polyurethane topcoats, tank linings and heat-resistant coatings for structural steel and severe environments.
Description
Activated zinc-rich epoxy primer with higher mechanical strength.
Recommended use
Long-term protection of steel in severely corrosive environments.
Description
Activated zinc-rich epoxy primer for long-term protection in severe environments.
Recommended use
Long-term protection of steel in severe and offshore environments.
Description
Solvent-borne, self-curing inorganic zinc silicate primer with strong weathering and abrasion resistance.
Recommended use
Heavy-duty rust-preventing primer for steel and piping, up to offshore environments.
Description
Two-component epoxy that cures flexible, with good abrasion and impact resistance and zinc phosphate.
Recommended use
Primer for galvanised, mild and stainless steel and aluminium in corrosive environments.
Description
Two-component polyamide-adduct epoxy, highly corrosion-resistant and curing down to -10°C.
Recommended use
Primer, intermediate or finishing coat for severely corrosive environments.
Description
High-solids epoxy with short drying time and zinc phosphate for better corrosion protection.
Recommended use
Onshore corrosion protection of new steel structures needing fast handling.
Description
High-solids, fast-drying epoxy with zinc phosphate for better corrosion protection.
Recommended use
Onshore protection of new steel structures up to C4 environments.
Description
Hard, tough epoxy primer with good resistance to seawater, oils and abrasion.
Recommended use
All-round primer for ballast/cargo tanks, holds and structural steel in severe environments.
Description
Fast-drying, high-solids epoxy giving hard-wearing, long-lasting barrier protection.
Recommended use
High-build intermediate coat for severe corrosive environments needing fast throughput.
Description
Polyamide-cured, high-solids epoxy forming a hard, tough coating that cures at low temperature.
Recommended use
Surface-tolerant coat for steel and concrete where low VOC and high film build are needed.
Description
Glossy polyurethane topcoat with very good gloss and colour retention.
Recommended use
Finishing coat for structural steel where colour and gloss retention matter.
Description
Glossy, high-build polyurethane topcoat with very good gloss and colour retention.
Recommended use
Finishing coat for structural steel in severely corrosive environments.
Description
Two-component polyurethane with good gloss retention and colour stability.
Recommended use
High-build topcoat for steel, including direct-to-metal systems in C2–C3 environments.
Description
Amine-cured phenolic (novolac) epoxy with excellent chemical and high-temperature resistance.
Recommended use
Interior lining for tanks and pipelines, and protection of hot subsea equipment.
Description
Solvent-free, high-build, polyamine-cured epoxy resistant to water, crude oil and abrasion.
Recommended use
Heavy-duty coating and lining for potable-water tanks and pipelines.
Description
Solvent-free, high-build, polyamine-cured epoxy with good fresh-water resistance.
Recommended use
Lining for potable-water tanks and high-build coating for abrasive or corrosive areas.
Description
100% solids high-performance epoxy lining with chemical resistance and fast return to service.
Recommended use
Interior lining for storage tanks and pipes exposed to a wide range of chemicals.
Description
100% solids epoxy novolac lining with high-temperature and chemical resistance in immersion.
Recommended use
Interior lining for tanks, vessels and pipes in aggressive chemical service.
Description
Glass-flake-filled epoxy novolac lining with high-temperature and chemical resistance.
Recommended use
Interior lining for tanks and pipes, and protection of buried pipework.
Description
Heat-resistant, aluminium-pigmented polysiloxane that cures hard at ambient conditions.
Recommended use
Long-term protection of hot pipelines, exhausts, stacks and other hot surfaces.
Description
Single-component heat-resistant acrylic-modified polysiloxane topcoat for up to 260°C.
Recommended use
Topcoat for hot pipelines, exhaust systems and stacks where a coloured finish is wanted.
Description
Oleoresinous aluminium topcoat with good heat resistance and light reflection.
Recommended use
Finishing coat for hot pipelines, exhausts and stacks where an aluminium finish is desired.
Description
Fibre-reinforced inorganic coating resisting temperatures up to 650°C and thermal shock.
Recommended use
Long-term protection of hot pipework and prevention of corrosion under insulation (CUI).
Description
Fast-drying phenolic epoxy giving barrier protection in high-temperature, wet conditions.
Recommended use
Protection against corrosion under insulation across a wide temperature range.
Description
Glass-flake-reinforced amine-cured epoxy: hard, impact- and abrasion-resistant, and cures under water.
Recommended use
High-build coating for splash zones, jetty pilings and offshore foundations.
Description
Self-priming, high-build modified epoxy that is abrasion- and corrosion-resistant and cures under water.
Recommended use
Heavy-duty coating for splash zones and permanent immersion.
Looking for something else?
We carry a much wider range of products. Reach out to our expert team today, and we’ll help you find the exact system for your project.